Figure 10 Kerb Alternative

A kerb that can be used as an alternative to the figure 10 kerb.

Manufactured in:

Bosun produces Figure 10 Kerb Alternative

Figure 10 Kerb Alternative

Bosun produces Figure 10 Kerb Alternative

A kerb that can be used as an alternative to the figure 10 kerb.

Manufactured in:


Click on the tab below for more information

Product Name Figure 10 Kerb Alternative
Length 1000mm x 150mm x 225mm
Mass Per Unit 73kg
Figure 10 Kerb Alternative Technical Information

It is common practice in South Africa to use a concrete foundation for precast concrete kerbs. This is recommended by Bosun.

It is important to fill expansion joints with a suitable sealant in order to prevent bedding and jointing material of segmented paving behind the kerbs seeping out of empty expansion joints. 

Precast kerbs are commonly installed in combination with cast in situ channels. Bosun recommends the use of precast channels which eliminates many issues caused by cast in situ channels. However, if channels are cast in situ, precast kerbs should be covered in order to protect them against concrete splatter. It is also recommended to protect kerbs against asphalt splatter.

Kerbs generally weigh in excess of 100kg per unit. Bosun actively promotes the use of specialist handling tools in order to protect workers on site.

These tools are available from www.cretesol.co.za

Probst Kerb Laying Clamp

Probst Kerb Laying Clamp Used To Install Precast Kerbs

Probst Universal Clamp

Probst Universal Clamp Used To Install Precast Kerbs