Bosun VFC Retaining Wall System


90-Degree Segmental Concrete Block Retaining Wall Solution

Slider

The VFC (Vertical Fixed Connection) retaining wall system is designed to construct 90° concrete block retaining walls. In addition, the VFC system meets SANRAL’s requirements for vertical retaining walls outlined in South Africa COTO specification for roads 2019.

The system uses a positive mechanical interlock connection between the geogrid and the block through an oval shaped interlocking pin. In addition to the fixed connection, the VFC uses a double nib system, resulting in increased shear resistance than what a single nib system can offer.

The innovativeness of this system is evident in the fact that the company holds two direct patents and one indirect patent on various aspects of its design.

A positive mechanical connection and double nib system:

  • The VFC block features a specially shaped channel that enables the connection of geogrid to a custom‐designed concrete pin (locking mechanism). The system mechanically secures geogrid to the block, enabling the building of vertical, 90 degree retaining walls.
    Patent: ZA 2018/04934
  • Vertical walls are required on various infrastructure projects with space constraints. The VFC creates more usable ground space.
  • The VFC further boasts a double nib system, resulting in increased shear resistance than what a single nib system could offer.
  • The VFC block is compliant with SANS8006-1 and tests have been conducted in accordance with ASTM D6638 and ASTM D6916 to verify the local facing stability.
  • The VFC block has been designed for use with a variety of both imported and locally manufactured geotextiles available in South Africa.

Easy to use and install:

As with the patented Bosun Castle Bottom kerbs (Patent ZA: 2012\09544), the VFC Base Block has cavities on its bottom surface. These cavities make the base block much quicker and easier to install. Where an imperfect bedding layer forced installers to uplift, fill up and re-lay conventional blocks it is easier to manoeuvre the Castellated block into place, with the bedding layer/levelling pad material being displaced into the cavities in the base block.

  • The castellated base block simplifies bedding and sets the levels for all succeeding layers.
  • The base block comes with a simple jig which enables the placement of a spirit level across both axes. This, in turn, facilitates accuracy and ease of setting out.
  • The base block can be inverted and used as capping on the top of the wall.
  • The locking of the geogrid into the VFC block is quick and simple.
  • The weight of the standard VFC block is approximately 24kg, making it light enough for one man to handle, in turn promoting hand labour.
  • The VFC block complies with SANS 508 and block heights in particular, are guaranteed to be consistent.

lnterchangeable face:

The VFC features an interchangeable face. This means that it can be used to construct linear, concave and convex wall geometries with a 2m radius.

No concrete infill or cutting of blocks is required when constructing curves.

The larger block face is used by default, while concave curves can be achieved by simply flipping the VFC block over from front to back.(Patent: ZA 2017/08449).

Convex curves can be achieved by shifting the rear parts of the blocks towards each other. This will result in less cutting on site.

Bosun Vertical Fixed Connection wall block advantages:

  • Vertical walls are required on various infrastructure projects with space constraints.
  • Vertical walls save a lot of wasted space at the top of a wall. Conventional retaining block walls are installed at around 80˚, at best.
  • The higher a vertical wall, the more usable ground space is created.
  • The double-nib-and-valley system increases sheer resistance, resulting in better interlinking of successive courses.
  • The VFC block complies with SANS 508 and block heights, in particular, are guaranteed to be consistent.

Manufactured in:

VFC system partially installed
Curved VFC wall partially installed

Cut Side View

Single VFC block render image

VFC Block

Single VFC base block render image

VFC Base Block

VFC wall render image showing curved installation

2m radius on concave and convex curves

Design Concept

3D render of VFC concept and final installation

Technical Information

Product Name VFC BlockVFC Base Block
Dimensions 300mm x 300mm 300mm x 250mm
Thickness140mm80mm
Mass per block 26kg 13kg